Bambu PLA Silk Multi-Color Filament - Technical Specification
Core Properties
- Lustrous surface with dynamic pigment variation
- Includes basic reusable spool
- Diameter: 1.75mm
Operating Constraints
- Pre-drying required
- Compatible: All AMS series configurations
Critical Processing Note: Perimeter velocity reduction to 40mm/s strongly advised for quality optimization.
Material Architecture
PLA Silk Multi-Color exists in two formulation types: Dual Color and Gradient variants.
Dual Color Configuration: Integrates two silk-finish pigments merged within single filament strand. Angular rotation of filament modifies print coloration through orientation-dependent color presentation. Gradient Configuration:Incorporates 2-4 progressive color transitions per spool, generating sophisticated polychromatic effects within single print cycles. Both formulations exhibit silky texture with reflective surface characteristics, appropriate for visually prominent professional-grade applications.
Dual Color Technology: Bi-Chromatic Dynamic Effects
Dual Color variant produces distinctive bi-tone results via seamlessly integrated pigment pairs. Viewing angle variation of completed prints reveals evolving color patterns through perspective-dependent reflections. Optimal applications: decorative models, figurines, exhibition pieces.
Gradient Technology: Progressive Color Transition
Gradient variant delivers 2-4 flowing color progressions within individual spools, producing refined, visually striking output. Appropriate for vases, sculptural forms, and ornamental designs, providing dimensional depth through continuous silk-textured gradations.
Equipment Compatibility Matrix
Compatible Hardware:
- Build surfaces: Cool Plate SuperTack, Smooth PEI, Textured PEI, 3D Effect plates
- Hotends: Hardened Steel 0.4mm, Stainless Steel 0.2mm/0.4mm nozzles
- Adhesives: Liquid Glue, Glue Stick formulations
Incompatible Hardware:
- Hardened Steel 0.6mm/0.8mm nozzles
RFID Parameter System
Processing parameters embedded in RFID tags enable automated configuration through AMS (Automatic Material System). Load-and-execute workflow eliminates manual parameter entry.
Available Documentation
- Technical Data Sheet (TDS)
- Material Safety Data Sheet (MSDS)
- RoHS Compliance Certification
- Hex Color Code Reference
Processing Protocols
Moisture Control: Despite factory drying and vacuum packaging, shipping environment variations may compromise moisture content. Immediate post-package drying mandatory, with sealed desiccant storage or AMS enclosure utilization. Repeat drying cycles required before prolonged storage intervals.
Drying Specifications: 55°C, 8-hour duration. Maintain low-humidity storage post-use. Execute pre-print drying if moisture absorption suspected. Reference: Filament drying documentation.
Velocity Parameters: Outer wall speed reduction to 40mm/s strongly recommended for surface quality enhancement.
Dual Color Rotation Artifact: Probability exists for filament rotation during extrusion, potentially generating inconsistent color transitions. A-series printer architectures demonstrate elevated risk due to structural design characteristics - A-series utilization not recommended for this material.
Gradient Manifestation Parameters
- Gradient effect intensity correlates with filament consumption volume, adjustable via infill density modification, print quantity variation, or spool starting position selection.
- Individual color segments span approximately 20m linear distance (65g+ mass).
- 40m (125g+) consumption ensures minimum single bi-chromatic transition.
- Four-color transition variants (example: Dawn Radiance) require 80m (250g+) minimum consumption for complete gradient spectrum manifestation.
Product Variance Disclaimer
Physical filament color and texture characteristics subject to production batch variation. Documentation imagery serves reference purpose only.
Logistics Information
- Free shipping threshold: orders >$89 USD (excludes printers, AMS systems, smoke purification units)
- Free shipping remote territories: orders >$199 USD (Alaska, Hawaii, Puerto Rico, Guam, Northern Mariana Islands, American Samoa - identical exclusions apply)
- Complete shipping terms: Shipping Policy documentation
Recommended Application Categories
- Sculptural decorative objects (mythical creatures, ornamental figures)
- Botanical replicas (floral arrangements, stem assemblies)
- Articulated mechanisms (fish models, kinetic sculptures)
- Containers and vessels (vases, decorative receptacles)
- Exhibition and display pieces requiring visual prominence
